Material Testing, Environmental Engineer Geo Tech - C4- KCSL

2025-01-28

中文

英语 (English)

所属地区： --

所属机构： --

抱歉，该信息暂无中文翻译信息，为您显示项目原文信息。

Published date: 28 January 2025

Open opportunity - This means that the contract is currently active, and the buying department is looking for potential suppliers to fulfil the contract.

Watch this notice Print this notice

Contract summary

Industry

Research, testing and scientific technical simulator - 38970000

Research and testing facilities construction work - 45214620

Location of contract

London

Value of contract

£500,000 to £1,000,000

Procurement reference

C4N89871066

Published date

28 January 2025

Closing date

31 January 2025

Closing time

11:20am

Contract start date

2 June 2025

Contract end date

30 June 2028

Contract type

Service contract

Contract is suitable for SMEs?

Contract is suitable for VCSEs?

Description

To ensure that concrete materials meet the design specifications and are compliant with applicable standards (e.g., BS EN 12350-2 for slump testing, BS EN 12390 for compressive strength testing).Sampling of fresh concrete for slump testing, air content, and temperature.Casting and curing concrete cubes/cylinders for compressive strength tests at 7,14, and 28 days.
Conducting tensile strength and flexural strength tests as required.
Mix design review to verify compliance with project specifications.
Non-destructive testing (NDT) methods, such as Schmidt hammer testing or ultrasonic pulse velocity, if required.
Report generation with detailed results and compliance statements.
Test reports for each batch of concrete.
Certificates of compliance for concrete materials.
Plate Bearing Tests, To determine the bearing capacity and compaction level of the subgrade for construction purposes (in accordance with BS 1377-9).
Site preparation and marking of test locations as per site plan.
Placement of the load plate (300 mm or 600 mm diameter depending on specification).
Application of load increments via hydraulic jack and recording settlement values.
Analysis of results to determine the modulus of subgrade reaction (k-value).
Comparison with design requirements for bearing capacity.
Field test logs and calibration certificates for test equipment.
Analysis report including graphical plots of load vs. settlement.
Recommendations for subgrade improvement if required.

This package includes
Environmental Engineer
To monitor and ensure compliance with environmental regulations, minimising environmental impacts during construction.
Geotechnical Engineer
To assess soil and ground conditions to provide foundation and earthworks recommendations